At Beatson Fans & Motors Ltd are area stockists for both ‘S&P Ventilation’ and ‘Helios Ventilation’. Both manufacturers offer top quality products at competitive prices.
Vent-K series In-line centrifugal fans
The Vent series of centrifugal fans are manufactured from high-grade corrosion-resistant pressed, galvanised steel.
Each unit is supplied as standard with a pre-wired junction box and robust foot mountings.
All models include an enclosed type, single-phase external rotor motor with a factory-matched backwards curved, non-stalling impeller.
On all models, the motor and terminal box are IP44, with class B insulation as well as having ball bearings and safety thermal overload protection.
- Electrical Supply: 230V-50/60Hz single phase.
- Temperature range from -40 deg C to +60 deg C
In-line mixed flow fans
The ‘TD-Mixvent Series’ is a range of low profile in-line mixed flow duct fans manufactured in tough reinforced plastic (from 160 to 800 models) or with metal casing steel finished in a tough epoxy-polyester paint coating (from 1000 to 6000 models).
The unique design of the support bracket allows the motor and impeller assembly to be fitted or removed without dismantling the adjacent ducting.
All fans are suitable for temperatures from -20 deg C to +40 deg C
Motors
Models 160-2000: Class B insulation with ball bearings and safety thermal overload protection. IP44.
Direct 2-speed connection and also suitable for voltage speed control. Electrical supply is Single Phase 230v-50/60Hz.
Models 4000-6000: Class F insulation with ball bearings and safety thermal overload protection IP54
Single speed motor suitable for voltage speed control. Electrical supply is Single Phase 230v 50/60Hz.
RR & RRK in-line centrifugal fans
Helios RRK (plastic) and RR (galvanized steel) in-line centrifugal fans.
230v 50/60Hz Single Phase. IP44. Speed Controllable. -30 deg C to +60 deg C