Beatson Fans & Motors Ltd hold Sheffield’s largest independent stock of single phase and three phase electric motors. Offering the best quality motors at the best available price.

From 0.12kw to 110kw off the shelf and up to 300kw within the hour!

All IEC standard frame-sizes, all complying to IE2 as standard and soon IE3!

Check out our full range of electric motors, for a detailed overview of all the products and services we offer, including our complete electric motor rewinding service.

High Quality 3 Phase Metric Motors from Stock

Standard IP55
Multi-Mount to D132
B3 Foot-Mounted
B5 Flange-Mounted
B14 Face-Mounted
Prices for IE2 where applicable.

Also available with:

Thermistors
Heaters
Tropicalisation
Force-Ventilation
Increased I.P Rating
Rain Canopy
Upgraded Bearings
Special Voltages

kW	Frame Size - 2 Pole 2800 RPM	Frame Size - 4 Pole 1420 RPM	Frame Size - 6 Pole 960 RPM	Frame Size - 8 Pole 750 RPM
0.18	D63*	D63	D71	D80*
0.25	D63*	D71*	D71	D80
0.37	D71*	D71	D80*	D90S*
0.55	D71*	D80*	D80	D90L*
0.75	D80*	D80	D90S*	D100L
1.1	D80*	D90S*	D90L*	D100L
1.5	D90S*	D90L*	D100L*	D112M
2.2	D90L*	D100L*	D112M	D123S
3.0	D100L*	D100L	D132S*	D132M
4.0	D112M*	D112M*	D132M	D160M
5.5	D132S*	D132S*	D132M	D160M
7.5	D132S*	D132M	D160M*	D160L
11.0	D160M*	D160M*	D160L	D180L
15.0	D160M*	D160L	D180L	D200L
18.5	D160L	D180M	D200L*	D225S
22.0	D180M	D180L*	D200L	D225M
30.0	D200L*	D200L	D225M	D250M
37.0	D200L	D225S	D250M*	D280S
45.0	D225M	D225M	D280S	D280M
55.0	D250M	D250M	D280M	D135S*
75.0	D280S*	D280S*	D315S*	D315M
90.0	D280M*	D280M*	D315M	D315L
110.0	D315S*	D315S	D315L	D315L

High quality, 1 Phase Metric Motors From Stock

Standard IP55
Multi-Mount To
B3 Foot-Mounted
B5 Flange-Mounted
B14 Face-Mounted

Permanent Capacitor

For 110v please call the Sales Team. 6 Pole (960 RPM) also available – POA.

N.B. Single phase motors are not direct equivalents of three phase motors. Single phase motors must run near the rated output point and full load current at all times. Repeated cycles of no load runs will damage the motors’ winding. Repeated cycles of start and run will damage the motors’ capacitors.

Standard Motor Sizes (kW)

2 Pole (2800 RPM) Motor Rating - kW	HP	Frame	4 Pole (1425 RPM) - kW	HP	Frame
0.25	0.33	D63	0.25	0.33	D71
0.37	0.5	D71	0.37	0.5	D71
0.55	0.75	D71	0.55	0.75	D80
0.75	1.0	D80	0.75	1.0	D80
1.1	1.5	D80	1.1	1.5	D90S
1.5	2.0	D90S	1.5	2.0	D90L
2.2	3.0	D90L	2.2	3.0	D100L
3.0	4.0	Call For Details	3.0	4.0	Call For Details

For 110v please call the Sales Team. 6 Pole (960 RPM) also available – POA.

2 Pole (2800 RPM) - kW	HP	Frame	4 Pole (1425 RPM) - kW	HP	Frame
0.25	0.33	N/A	0.25	0.33	D71
0.37	0.5	D71	0.37	0.5	D71
0.55	0.55	D71	0.55	0.75	D80
0.75	1.0	D80	0.75	1.0	D80
1.1	1.5	D80	1.1	1.5	D90S
1.5	2.0	D90S	1.5	2.0	D90L
2.2	3.0	D90L	2.2	3.0	D100L
3.0	4.0	D100L	3.0	4.0	D112M

Nett weight & dimensions HC, AB & L may differ between different manufacturers, figures given are for guidance only. Detailed manufacturers drawings and technical information on request.

Frame	A	B	C	D dia	E	F	G	H	K dia	M p.c.d.	N	P	S dia	T	AB *	HC *	L *	* NETT WT KG
56	90	71	36	9	20	3	7.2	56	5.8	100	80	120	4-Ø 7	3	110	157	169	3.1
63	100	80	40	11	23	4	8.5	63	7	115	95	140	4-Ø 10	3	122	160	220	5.6
71	112	90	45	14	30	5	11	71	7	130	110	160	4-Ø 10	3.5	136	175	250	7
80	125	100	50	19	40	6	15.5	80	10	165	130	200	4-Ø 12	3.5	152	200	285	10
90S	140	100	56	24	50	8	20	90	10	165	130	200	4-Ø 12	3.5	170	230	310	15
90L	140	125	56	24	50	8	20	90	10	165	130	200	4-Ø 12	3.4	170	230	335	18
100L	160	140	63	28	60	8	24	100	12	215	180	250	4-Ø 15	4	192	250	360	21
112M	190	140	70	28	60	8	24	112	12	215	180	250	4-Ø 15	4	222	230	405	45
132S	216	140	89	38	80	10	33	132	12	265	230	300	4-Ø 15	4	254	270	470	71
132M	216	178	89	38	80	10	33	132	12	265	230	300	4-Ø 10	4	254	270	510	82
160M	254	210	108	42	110	12	37	160	15	300	250	350	4-Ø 19	5	308	340	605	127
160L	254	254	108	42	110	12	37	160	15	300	250	350	4-Ø 19	5	308	340	650	148
180M	279	241	121	48	110	14	42.5	180	15	300	250	350	4-Ø 19	5	348	385	668	181
180L	279	279	121	48	110	14	43.3	180	15	300	250	350	4-Ø 19	5	348	385	706	215
200L	318	305	133	55	110	16	49	200	19	350	300	400	4-Ø 19	5	381	436	775	258
225S	356	286	149	60	140	18	53	225	19	400	350	450	8-Ø 19	5	425	454	840	363
225M	356	311	149	60	140	18	53	225	19	400	350	450	8-Ø 19	5	425	454	840	393
250S	406	311	168	65	140	18	58	250	24	500	450	550	8-Ø 19	5	483	513	930	461
250M	406	349	168	65	140	18	58	250	24	500	450	550	8-Ø 19	5	483	513	930	507

*Approximate only – may differ between different manufacturers.

Both Sizes - Frame	AC *	AD *	D	DH	E	F	G	L *	B14A - M	N	P	S	T	B14B - M	N	P	S	T
56	124	93	9	-	20	3	7.2	169	65	50	80	M5	2.5	85	70	105	M6	2.5
63	140	112	11	M3x9	23	4	8.5	225	75	60	90	M5	2.5	100	80	120	M6	3
71	145	124	14	M4x10	30	5	11	250	85	70	105	M6	2.5	115	95	140	M8	3
80	175	133	19	M6x16	40	6	15.5	293	100	80	120	M6	3	130	110	160	M8	3.5
90	190	143	24	M8x19	50	8	20	345	115	95	140	M8	3	130	110	160	M8	3.5
100	210	158	28	M10x22	60	8	24	382	130	110	160	M8	3.5	165	130	200	M10	3.5
112	235	168	28	M10x22	60	8	24	382	130	110	160	M8	3.5	165	130	200	M10	3.5
132	272	190	38	M12x28	80	10	33	515	165	130	200	M10	3.5
132	275	188	38	M12x28	80	10	33	515	165	130	200	M10	3.5
160M	330	250	42	M16x36	110	12	37	625	215	180	250	M12	4
160L	330	250	42	M16x36	110	12	37	670	215	180	250	M12	4

Contact us

Got a question or want to tell us something?

Simply put your details and questions into the form below and we’ll get back to you as soon as possible.

You can also call our office on 0114 204 4831, we’re open Monday to Friday from 8am-4:30pm.

Testimonials

If there's anything these guys (and gals) don't know about motors, it's probably not worth knowing. Excellent service. Simply faultless.
Rob HolmesGoogle
Very friendly, they can sort you anything out.
Antony JonesGoogle
Great people who try and help.
James MarsdenGoogle