Long Cased & Bifurcated Axial Fans

Home » Industrial Fans » Long Cased & Bifurcated Axial Fans

Axial Flow Fans

LONG CASE ARRANGEMENT

Single stage fans – direct driven – for vertical/horizontal mounting

Beatson Fans & Motors Ltd offer an extensive range of Long Cased Axial Fans.
We have a range of standard case sizes to which we can add a motor and impeller to suit your technical specification (parameters permitting).
We also have the capability to copy your original (no longer manufactured) fan design to suit your application.
Available as standard metric sizes from 250mm to 1250mm with a variety of performances and finishes and IP55 as standard.

axial-flow

Fan Construction:

Casings: fully welded mild steel flanged either end and complete with access door. Wire mesh guards and external terminal boxes can be provided as optional extras.

Motors: totally enclosed fan ventilated generally to IEC 34-1 BS 5000 and BS 4999. Foot mounted. Single or 3 Phase. Motors for hazardous areas i.e type EX N, EX D (B.A.S.E.F.F.A Certified) or company specifications can be provided on all sizes of fans.

Voltages: standard motors are wound for 240, 380 or 415 volts 50Hz, 60Hz or any special voltage or frequency can be provided.

Impellers: die cast polypropylene blades are mounted in die cast aluminium hub, bored and keywayed to suit the motor shaft. Aluminium bladed impellers can be provided as an optional extra.

DIMENSIONS
long-diagram

DIMENSIONS - POPULAR SIZES (mm)

FAN SIZEABB1CC1DEF
250250334450300550810294
300300384560330610810344
400400484660400680812444
500500584735430790812544
6006006847605008001212644
7007007849005008001212744
7507508589505008001212808
800800908100065010001214858
9009001033120070012501618980
1000100011331350900130016181080


long-diagram
long1

Bifurcated Axial Fans

To exhaust a wide variety of hot gases, paint fumes, smoke, steam and dust in suspension.
Beatson Fans & Motors Ltd offer an extensive range of Bifurcated Fans, suitable for applications where the motor needs to be out of the air stream, such as hot air applications, fume extract, smoke extract, steam, dust in suspension and even paint fumes (although this depends on whether they are cellulose or not – if they are we can offer ATEX certified).
Available in a range from 150mm to 1250mm diameter (metric) and 6” to 38” diameter (imperial) and with a variety of performances and finishes and IP55 as standard.
We can also build these to your specific dimensions or as per your old (no longer produced) fan unit.

bifurcated

Normal Temperature (NT) Type

For use up to 80C
Mild steel with polypropylene impeller.
Standard finish: air drying hammer gloss enamel. Corrosion-resistant finishes available.

High Temperature (HT) Type

For use up to 200C
Sturdy mild steel construction with aluminium impeller.
Standard finish: high temperature aluminium paint. Corrosion resistant finishes are available.
*Quotations given for stainless steel, aluminium or P.V.C. manufacture to suit industries such as chemicals or foodstuffs.

Motors

Motor: totally enclosed fan ventilated generally to IEC 34-1 BS 5000 and BS 4999.
Foot mounted.
Single or 3 phase
Motors for hazardous areas i.e. Type EX N, EX D (B.A.S.E.F.F.A Certified) or company specifications can be provided on all sizes of fans.
Voltages: standard motors are wound for 240, 380 or 415 Volts 50Hz, 60Hz or any special voltage or frequency can be provided.

DIMENSIONS
bifurcated-diagram

DIMENSIONS - POPULAR SIZES (mm)

FAN SIZEABB1CC1DEF
250250334450300550810294
300300384560330610810344
400400484660400680812444
500500584735430790812544
6006006847605008001212644
7007007849005008001212744
7507508589505008001212808
800800908100065010001214858
9009001033120070012501618980
1000100011331350900130016181080


long2
bifurcated-diagram