Soler & Palau Fans
COMPACT Series type HCFB / HCFT Plastic impellers
Description
Range of low profile plate mounted axial fans fitted with plastic impellers (250 to 630) or aluminium hub and plastic blades (710 to 1000).
Available, depending upon the model, with single or three phase motors in 2, 4, 6 or 8 poles.
Motors
All the motors are IP65 (1), Class F insulation (2), equipped with thermal protection.
All motors are speed controllable are speed controllable by autotransformer except 2 pole and /4-630, /4-710, 800, 900, 1000 models.
Models 800 to 1000 are speed controllable by inverter.
Electrical supplies:
* Single phase 230V-50Hz. (Capacitor located inside the wiring terminal box).
* Three phase 230/400V-50Hz or 400V-50Hz.
(See characteristic chart).
(1) 2 pole motor and 800, 900 & 1000 models are IP55.
(2) Working temperatures from -40 ºC up to 70 ºC. Except models 800 to 1000 suitable for usage in environments from -20 ºC to 40 ºC.
Additional Information
Standard air direction: form (A) configuration (Motor over Impeller).
On request
Air direction: form (B) configuration (Impeller over Motor).
Inlet finger proof guard for models 800 to 1000.
Compact design
Compact design created by the combination of the motor with the factory matched direct drive wrap around impeller hub.
Corrosion resistance
Mounting plate, motor support and finger proof guard protected by cataforesis primer and black polyester paint finish. Stainless steel screws.
Terminal box
Wiring terminal box with cable gland PG-11.
Impeller dynamically balanced
Impellers are dynamically balanced, according to ISO 1940 standard, giving vibration free operation.
Configuration for models Ø 800 to 1000
Click here for Full Specification
COMPACT Series TCBB / TCBT Aluminium impellers
Description
Range of cylindrical cased axial fans fitted with aluminium impellers and manufactured from high grade rolled galvanised steel and protected against corrosion by cataforesis primer and black polyester paint finish.
All models are supplied with pre-wired wiring junction box located on the outside of the fan casing for easy wiring access.
Available, depending upon the model, with single or three phase motors in 2, 4, 6 or 8 poles.
Motors
All the motors are IP65 (1), Class F insulation (2), equipped with thermal protection.
All motors are speed controllable by autotransformer except 2 poles and /4-560, /4-630, /4-710 and 800 models.
Models /2-315/H, /2-355/H, /4-710 and 800 controllable by intverter.
Electrical supplies:
* Single phase 230V-50Hz. (Capacitor located inside the wiring terminal box).
* Three phase 230/400V-50Hz or 400V-50Hz (See characteristic chart).
(1) 2/315/H, 2/355/H, /4-710 and 800 models are IP55.
(2) Working temperatures from -40ºC to 70ºC (except /2-315/H, /2-355/H, /4-710 and 800 models: suitable for usage in environments from -20ºC to 40ºC).
Additional Information
Standard air direction: form (B) configuration (Impeller over Motor); form (A) configuration (Motor over Impeller) for /2-315/L, /2-315/G, /2-355/J and /2-355/I models.
On request
Air direction: form (A) configuration (Motor over Impeller).
Three phase motors suitable for inverter control (E22 version) for models from 250 to 710 except /2-315/H, /2-355/H and /4-710.
Two speed motors (4/8 poles).
Explosion proof versions in accordance to ATEX Directive for three phase models:
* Increase safety EX II2G EExeIIT3 (except 2 pole motors and 250 models).
* Flame proof only for /4-710 and 800 models, EX II2G EExdIIBT5 or EExdIICT4.
Working temperatures from -30 ºC to 40 ºC.
Corrosion resistance
Rolled steel casings and motor support protected by cataforesis primer and black polyester paint finish. Stainless steel screws
Terminal box
Wiring terminal box with cable gland PG-11
Impeller dynamically balanced
Impellers are dynamically balanced, according to ISO 1940 standard, giving vibration free operation.
Click here for Full Specification
Soler & Palau in-line Mixed Flow Duct Fans
Click here for Full Specification
Plate & Cased Fans by S & P
Click here for Full Specification